When I decided to try a new sunless tanner, I discovered that Nu Skin Sunless Tanner could provide a natural and even tan without the harmful exposure to the sun. My experience with self-tanners has been mixed over the years, often leading to streaky or orange results. But this time, I wanted to get it right. So, I spent some time researching the proper application steps to make sure the tan would look flawless.
Before I even opened the tube, I knew preparation was key. The night before, I made sure to exfoliate my skin thoroughly. This step helps ensure that the tanner absorbs evenly into the skin. I spent around 20 minutes using an exfoliating glove, paying special attention to rough patches like elbows and knees. This step can't be rushed because dead skin cells can cause uneven absorption, and nobody wants a patchy tan!
After exfoliating, I took a quick shower to remove any sweat and oil from my skin. Once out of the shower, I made sure to dry myself completely. Water can act as a barrier between the skin and the tanning product, leading to streaks. Post-shower, I used a light, oil-free moisturizer on areas like my knees, elbows, and ankles because these spots can absorb more product and appear darker.
The next morning, I was all set to apply the nu skin sunless tanner. Nu Skin recommends ensuring your skin is cool and dry before application. I found it helpful to apply in a well-lit room so I could see exactly where the tanner was going. Nu Skin’s formula is tinted, which makes the application process easier since you can see where you've already applied it.
Starting at my legs, I squeezed out a quarter-sized amount, about 5 grams in weight, and began to rub it in using circular motions. It’s crucial to apply it evenly to avoid streaks. I worked my way up, section by section, always using small amounts to build up the color gradually. I discovered that using about 30 grams in total for my whole body was enough to achieve a natural-looking tan without overdoing it.
For my face, I was a bit apprehensive. I didn’t want it to appear too dark. So, I mixed a small amount of the tanner with my daily moisturizer. This diluted the product slightly, providing a more subtle glow. Nu Skin advises waiting for at least 10 minutes after application before dressing. To be safe, I waited 15 minutes to ensure the product was completely dry. Then, I put on loose-fitting clothes to avoid any transfer or smudging.
Within a few hours, I noticed the color developing into a natural tan. By the 4-hour mark, the full effect was visible, giving me a healthy glow without any of the usual issues I faced with other tanners. The formula left my skin feeling soft and hydrated, which was a pleasant surprise because some self-tanners can be drying.
Maintaining the tan was another consideration. To keep the color looking fresh, I learned that moisturizing every day is essential. Dry skin can cause the tan to fade unevenly. I made it a point to use a hydrating lotion every morning and night. On day three, I did a light exfoliation and re-applied the tanner to keep the color vibrant.
In terms of durability, my tan lasted approximately 7 days before I noticed significant fading. This is pretty impressive compared to other products I've used in the past. By following these steps, it felt effortless to achieve and maintain a beautiful, even tan. Each time I used the product, I became more confident in the application process.
Nu Skin Sunless Tanner has definitely earned a spot on my skincare shelf. Its ease of use, combined with the natural-looking results, made it a standout in my experience with sunless tanning products.